|
revolverMachined from a single billet of high grade austenitic (non magnetic) stainless steel.
Revolver weighs 2.530 kg +/- 45 gm. Linn platters vary a bit but mine is 2.542. In the vast majority of cases Revolver is a straight forward swap over upgrade. The inner diameter remains the same ensuring compatibility with both Radikal and Lingo 4 sensor pick ups. The primary benefit is even weight distribution which allows the stylus to track the groove at optimum level. Unlike a cast platter there is no porosity (gaps or air pockets, think honeycomb bar). Porosity has a detrimental effect causing the platter to be unbalanced. Revolver is not subject to these compromises. The manufacturing process will ensure each unit is within a very fine tolerance of 0.10mm and beautifully finished in natural silver. |
|
evenstarEvenstar weighs 118gm, is machined from a solid billet of aluminium, anodised, and finished in satin silver. The side that makes contact with the vinyl rests on three machined lands. The topside has a machined-out recess which aids weight distribution and gentle down force.
There are no adverse affects on the suspension or bearing. The point is to stabilise the record and make the job of the stylus more optimal - this results in a better sound quality. There is a clarity to the sound and greater authority. Evenstar is a high quality accessory at an affordable price. |
|
k-u-v precision subDesigned to be used with the standard Linn arm boards.
Supplied with torx wood screws, TA machined washers and Nylock nuts. Machined from a solid billet of high grade aluminium it features the signature Tangerine grooves, designed to break up standing waves. Critically, there are three machined lands at the two most important elements of the player: namely, where the bearing and arm board are mounted. Flat surface to flat surface gives a poor interface, the use of lands is highly effective for a superior coupling, resulting in better performance and sound quality. |
|
eklipseEklipse is the new sub platform designed to work with Skorpion.
It is machined from a solid billet of aluminium and shares in common the isolation foot assembly of Skorpion, it is a modular design. |
